4.Wipe the feed roller (metal shaft roller) with a cotton swab dipped in isopropyl alcohol. The feed roller may not come clean in one wipe, so repeat several times.
Changing dye sub cleaning pads
In order to maintain good print quality, replace the or-
1.To remove the cleaning pad, open the front cover, and pull on the left end of the cleaning pad while holding the right side of the pad, as shown in the figure.
Caution:
Avoid getting alcohol on the platen. Wait until the alcohol dries before printing.
5.Press the ready/insert button to turn the feed roller and wipe the roller with a cotton swab until clean.
6.Close the front cover after you have finished cleaning the feed roller.
7.The printer will be ready for printing.
Caution:
The white pad (next to the cleaning pad) is not removable.
62 | User’s Guide |
