Cleaning and care
Remove the cover with the milk pipework. Clean the whole part in the dishwasher without taking it apart.
If there are milk residues in the milk pipework you can clean them with the cleaning brush provided. To do this, take the cover and the milk pipework apart as follows:
Do not pull the milk hoses off the retainers. This may cause the milk pipework to leak.
Press the small recess on the dispenser retainer and pull the retainer out towards the front . Take the milk hoses off the guide rail.
Grasp the second retainer by the stud and pull it up and off.
Now you can clean the hoses with the brush under running water.
Insert the brush into the milk hoses one after the other from below. Push the brush back and forth to the end until there is no more no milk residue in the hoses.
Reassemble the milk pipework as follows:
Push the retainer with the plug onto the cover as shown. Make sure that the retainer is sitting properly on the cover.
44
