Main dispenser^Pull the main dispenser all the way
down aand pull the cover forward to
remove b.
^Turn the cover around, slide the
insert upward and out, and clean
both parts thoroughly.
^Slide the insert back into the cover
until it clicks into place.
^Pull the nozzles of the main
dispenser out.
^Pull both rubber stoppers aout and
clean the stoppers and nozzles
thoroughly.
^Pull the air intake pipe bout if
necessary. You can knead or blow
through the pipe to remove any
potential blockages.
Never use a sharp object to remove
blockages, this could damage the
parts.
^Put the rubber stoppers back into
place.
^After cleaning the nozzles of the main
dispenser, slide them back into the
machine firmly upward to ensure they
are securely in place.
^Replace the cover and slide the main
dispenser up.
Cleaning and care
46