Canon iP3300 manual Check the condition of the Print Head, Start Print Head Deep Cleaning

Note

Clicking Initial Check Items displays the items to be checked before deep cleaning.

(4)Click Execute.

(5)When the confirmation message is displayed, click OK.

Print Head Deep Cleaning starts when the POWER lamp starts flashing green.

Do not perform any other operations until Print Head Deep Cleaning finishes. This takes about 100 seconds.

5 Check the condition of the Print Head.

(1)Print the nozzle check pattern to check the print head condition. See Printing the Nozzle Check Pattern.

If a particular color is not printed properly, replace the ink tank of that color.

See Replacing an Ink Tank.

(2)If the print head nozzles are still not clean, turn off the printer and perform another Print Head Deep Cleaning after 24 hours.

(3)If this does not solve the problem, the Print Head may be damaged. Contact your Canon Service representative.

1 Make sure that the printer is on, and then load a sheet of A4 or Letter-sized plain paper in the Auto Sheet Feeder.

Set the Paper Thickness Lever to the left.

2 Open the Front Feeder and extend the Paper Output Support.

3 Open the Canon IJ Printer Utility dialog box.

See Opening the Canon IJ Printer Utility (Macintosh).

4 Start Print Head Deep Cleaning.

92