Canon iP3300 manual Drag the Ink Drying Wait Time slide bar

(5)Hold down the RESUME/CANCEL button and release it when the POWER lamp flashes green five times.

The paper cleans the inside of the printer as it feeds through the printer.

If the ejected paper is smudged, clean the inside of the printer again.

If the problem is not resolved after performing cleaning twice, the protrusions inside the printer may be stained. In this case, wipe off any ink from the protrusions using a cotton swab or the like.

	Important
	Before cleaning the inner parts, be sure to turn
	the printer off.
Printed paper	If a sheet is being printed out before the previous
is taking long	sheet has had time to dry, adjust the Ink Drying
to dry.	Wait Time setting on the printer driver.
	When printing documents such as photos, which
	takes longer to dry, the next sheet may be fed
	before the previous one has dried.
	Either remove each printed sheet from the Paper
	Output Tray as soon as it is printed, or specify the
	Ink Drying Wait Time so that the printer will
	pause after each sheet has printed.

(1) Make sure that the printer is turned on.

(2) Open the printer properties dialog box.

See Opening the Printer Properties Dialog Box

Directly from the Start Menu.

(3) Click the Maintenance tab and then Custom Settings.

(4) Drag the Ink Drying Wait Time slide bar

139