Canon iP3300 manual Printer Driver Settings

Printer Driver Settings

Media Type: Photo Paper Plus Double Sided

Page Size: Make sure that the setting matches the size set in the application.

Handling of Printed Output

Remove each sheet as soon as it is printed.

Use the drying stand included in the Photo Paper Plus Double Sided PP- 101D package to dry the printouts for more than 30 minutes. When printouts need to be stacked up, allow them to dry for about 48 hours with a drying sheet, also provided in the package, inserted between each printout sheet. For details, refer to the instruction manual of Photo Paper Plus Double Sided PP-101D.

Do not attempt to dry the ink with a hair dryer or by exposing printed sheets to direct sunlight.

Do not touch the printed surface nor stack the printed sheets until the ink is fixed.

Storing Printed Output

Store printouts in photo albums or plastic folders to protect them from direct exposure to air.

This will help protect printouts from color fading.

Avoid storing printouts in a hot or humid location or in direct sunlight. Store them in regular room temperature.

Avoid displaying or exhibiting printouts outdoors or in direct sunlight.

Printable Area

See Printing Area.

Note

To prepare the data to be printed with Borderless Printing, create a document with the same size as the size of paper you are printing on, and then paste the image so that it fills the document area without leaving any margins. If you are using an application that allows you to set margins, set the left, right, top and bottom margins to 0 inches / mm. For instructions on setting margins, refer to the instruction manual of your application.

54