Canon iP3300 manual Press firmly on the Rear Cover until it is

If the dirt is hard to remove, slightly moisten the cotton swab with water. Paper loaded in the Front Feeder will gradually feed and eject as you manually rotate the roller. Remove ejected paper. If you run out of paper while cleaning, reload the paper in the Front Feeder.

(5)Reattach the Rear Cover.

Hold the Rear Cover so that the Rear Cover Lever comes to the left. Align the protrusions at the right edge of the cover with the slots at the rear of the printer and press on the lever to reattach the Rear Cover.

Important

	Press firmly on the Rear Cover until it is
	fit squarely in the rear of the printer. If
	the Rear Cover is not reattached
	properly, paper may not be fed properly
	and cause paper jams.
Paper not loaded	Make sure of the following when you
properly.	load paper in the printer.
	When loading two or more sheets
	of paper, align the edges of the
	sheets before loading.
	Always load the paper in portrait
	orientation, either in the Auto Sheet
	Feeder or the Front Feeder,
	regardless of the printing orientation.
	When loading paper in the Auto
	Sheet Feeder, load the paper with the
	print side facing UP. Align the right
	edge of the paper stack against the
	Cover Guide and slide the Paper
	Guide so that it just touches the left

156