Canon iP3300 manual Printing Stops Before It Is Completed

Your printer is not selected in the printer driver.

The printer port is not configured appropriately.

The printer will not print properly if you are using a driver for a different printer.

In Windows, make sure that Canon iP3300 is selected in the Print dialog box.

On a Macintosh, make sure that iP3300 is selected in Printer in the Print dialog box.

Note

To make your printer the one selected by default, select Set as Default Printer (Windows) or Make Default (Macintosh).

Set "USBnnn" ("MPUSBPRNnn" in Windows Me or Windows 98), where "n" is a number, as the printer port.

(1)Click Start > Control Panel > Printers and Other Hardware > Printers and Faxes.

In non-XP Windows, click Start > Settings >

Printers.

(2)Click the Canon iP3300 icon.

(3)Open the File menu and select Properties.

(4)Click the Ports tab (the Details tab in Windows Me or Windows 98) to confirm the port settings. Modify them if necessary.

Printing Stops Before It Is Completed

Cause	Action
The printer has	If the printer has been printing
been printing	continuously for a long time, the Print
continuously over	Head may overheat. To protect the Print
a long period.	Head, the printer may stop printing at a
	line break for a period of time and then
	resume printing.
	In this case, interrupt your print session
	at a convenient time and turn the printer
	off for at least 15 minutes.
	Additionally, if the printer has been
	printing graphics or photos with intense
	colors continuously over a period of

148