Canon iP3300 manual Tank. See Replacing an Ink Tank

	advised that Canon shall not be liable
	for any malfunction or trouble which
	may be caused by continuation of
	printing under the ink out condition.
	See Replacing an Ink Tank.
"Ink Error"	If the ALARM lamp on the printer
	flashes orange thirteen times, an ink
	tank that was once empty is installed.
	Replace the ink tank and close the Top
	Cover.
	Printing with an ink tank that was once
	empty may damage the printer.
	If you want to continue printing in this
	condition, you need to release the
	function for detecting the remaining ink
	level. Press and hold the RESUME/
	CANCEL button for at least 5 seconds,
	and then release it.
	* With this operation, releasing the
	function for detecting the remaining ink
	level is memorized. Please be advised
	that Canon shall not be liable for any
	printer malfunction or damage caused
	by refilled ink tanks.
	See Replacing an Ink Tank.
"Hardware Error"	When the ALARM lamp on the printer
	flashes orange fifteen times, an ink tank
	error has occurred. Replace the ink
	tank. See Replacing an Ink Tank.
"Printer error"	An error requiring servicing may have
	occurred. (Printer POWER lamp flashes
	green and ALARM lamp flashes orange
	alternately.)
	Disconnect the cable between the
	printer and the camera, turn off the
	printer, and unplug the power cord of
	the printer from the power supply. After
	a while, plug the power cord of the
	printer back in, turn on the printer, and
	then reconnect the camera to the
	printer.
	If the same error occurs, contact your
	Canon Service representative.

180