Canon iP3300 manual See Alarm Lamp Flashes Orange

Note

Opening the Top Cover while printing moves the Print Head Holder to the right. Close the Top Cover, and reopen it after printing finishes.

Cause	Action
The printer is not	Check if the POWER lamp is lit green.
ready.	The Print Head Holder will not move
	unless the power is on. If the POWER
	lamp is off, close the Top Cover and
	turn the printer on.
	While the POWER lamp is flashing
	green, the printer is initializing. Wait until
	the POWER lamp stops flashing and
	remains lit green, and then open the
	Top Cover again.
An error has	Close the Top Cover, confirm the
occurred on the	number of times the ALARM lamp is
printer.	flashing, take the appropriate action to
	resolve the error, and then reopen it.
	For details on how to resolve the error,
	see ALARM Lamp Flashes Orange.

The Top Cover has been left open for 10 minutes or longer.

If the Top Cover is left open for more than 10 minutes, the Print Head Holder moves to the right to prevent the Print Head from drying out. Close and reopen the Top Cover to return the Print Head Holder to the center.

The printer has	If the printer has been printing
been printing	continuously for a long time, close the
continuously over	Top Cover, wait a while, then reopen it.
a long period.	If the printer has been printing
	continuously for a long time, the Print
	Head will overheat, and the printer stops
	printing temporarily to protect the Print
	Head. In this case, close the Top Cover
	for a while, then reopen it to move the
	Print Head Holder to the center.

152