sheets of paper you load at a time to around half (around 0.2 inches / 5 mm in paper stack height).

Do not stack more than 50 sheets in the Paper Output Tray.

When Printing on 5" x 7", 4" x 6", or 2.13" x 3.39" (Credit Card-sized) paper

Load paper only in the Auto Sheet Feeder.

You can load up to 20 sheets of 4" x 6" or 2.13" x 3.39" (credit card-sized) paper and 10 sheets of 5" x 7" paper.

We recommend using genuine Canon photo media when printing photographs.

See Printing Media.

Loading Paper in the Auto Sheet Feeder

1 Flatten the four corners of the paper before loading it.

Note

Align the edges of paper neatly before loading. Loading paper without aligning the edges may cause paper jams.

If paper is curled, hold the opposing curled corners and gently bend them in the opposite direction until the paper becomes completely flat. See Paper is curled..

To avoid curling, handle paper as follows.

-Put unused paper back into the package and keep them on a level surface.

-Take out only the necessary number of sheets from the package, just before printing.

28

Page 28
Image 28
Canon iP3300 manual See Printing Media