Canon iP3300 manual Printer Moves But Ink Is Not Ejected

time, the printer may stop printing to protect the Print Head. In this case, printing will not resume automatically. Turn the printer off for at least 15 minutes.

	Caution
	The Print Head and the surrounding
	area can become extremely hot inside
	the printer. Never touch the Print Head
	or nearby components.
Out of paper.	Make sure that paper is loaded in the
	selected paper source.
	Reload paper if no paper is found in the
	selected paper source (Auto Sheet
	Feeder or the Front Feeder).
	If the same paper is loaded in the other
	paper source, you can switch the paper
	source with the printer driver to continue
	printing.
	If both paper sources have run out of
	paper, confirm the selected paper
	source and load paper there.
Printing	When the POWER lamp is flashing
documents with	green, the printer or the computer is
plenty of	processing data. Printing large data
photographs or	such as photos or graphics takes time
illustrations.	for the printer and the computer to
	process, during which the printer may
	appear to have stopped operating.
	In addition, when printing data that uses
	a large amount of ink continuously on
	plain paper, the printer may pause
	temporarily. In either case, wait until the
	process is complete.
	Note
	If you are printing a document with a
	large printing area or printing multiple
	copies of a document, printing may
	pause to allow the ink to dry.

Printer Moves But Ink Is Not Ejected

149