Photo Paper Plus Semi-gloss SG-101, SG-201

This paper provides the same excellent water-resistant coating and superior color reproduction as the Photo Paper Plus Glossy PP-101, while offering a less reflective surface, closer to a traditional matte finish.

This paper is suitable for borderless printing.

Size

Photo Paper Plus Semi-gloss SG-101 is available in A4, Letter, and 4" x 6" / 101.6 x 152.4 mm sizes.

Photo Paper Plus Semi-gloss SG-201 is available in A4, Letter, 4" x 6" / 101.6 x 152.4 mm, and 8" x 10" / 203.2 x 254.0 mm sizes.

Loading

Load the paper in the Auto Sheet Feeder.

Load the paper with the whiter side facing UP.

A maximum of the following number of sheets can be loaded at once, depending on the paper size; A4 (SG-101, SG-201), Letter (SG-101, SG- 201), or 8" x 10" / 203.2 x 254.0 mm (SG-201) paper, up to 10 sheets; 4" x 6" / 101.6 x 152.4 mm (SG-101, SG-201) paper, up to 20 sheets.

If paper is curled, flatten it before loading.

Loading paper in stacks may cause the print side to be marked as it is fed in. In this case, load one sheet at a time.

Set the Paper Thickness Lever to the left.

Printer Driver Settings

Media Type: Photo Paper Plus Glossy

Page Size: Make sure that the setting matches the size set in the application.

Handling of Printed Output

Remove each sheet as soon as it is printed.

When printouts can be arranged without stacking them up, allow them to dry for about 24 hours. When printouts need to be stacked up, first allow each printout to dry for about 15 minutes, stack them with a sheet of plain paper, such as copying paper, inserted between each printout sheet, and allow them to dry for about 24 hours.

58

Page 58
Image 58
Canon iP3300 manual Photo Paper Plus Semi-gloss SG-101, SG-201