Canon iP3300 manual Instructions

	(where n is a number) is selected for
	Print to the following port(s).
	In Windows Me or Windows 98, click
	the Details tab and make sure that
	MPUSBPRNnn (Canon iP3300
	Printer) is selected for Print to the
	following port.
	If the port setting is not correct, change
	the port setting according to the
	interface you are using, or reinstall the
	printer driver.
The printer is not	Make sure that the printer cable is
connected	securely plugged in to the printer and
properly.	the computer.
	If you are using a relay device
	such as a USB hub, disconnect it,
	connect the printer directly to the
	computer, and try printing again. If
	printing starts normally, there is a
	problem with the relay device.
	Consult the reseller of the relay
	device for details.
	There could also be a problem with
	the USB cable. Replace the USB
	cable and try printing again.
Printer driver is	The printer driver may not be installed
not installed	properly. Uninstall them following the
properly.	procedure described in the Printer
	Driver Guide on-screen manual and
	reinstall them following the procedure
	described in the Easy Setup
	Instructions.

The printer port is not configured appropriately.

Follow the procedure below to check the printer port status.

(1)Click Start, right-click My Computer, and select Properties.

In non-XP Windows, right-click My Computer on the desktop and select Properties.

(2)Click the Hardware tab, click Device Manager, double-click Universal Serial Bus controllers, and then double-click USB

168