Canon iP3300 manual Printing the Nozzle Check Pattern, Print the Nozzle Check Pattern

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles.

Note

You cannot feed paper from the Front Feeder to print the Nozzle Check Pattern. Always load paper in the Auto Sheet Feeder.

Printing the Nozzle Check Pattern Without a Computer

Nozzle check pattern printing can be performed also from the printer itself using the RESUME/CANCEL button.

1.Make sure that the printer is on, load a sheet of A4 or Letter-sized plain paper in the Auto Sheet Feeder.

2.Set the Paper Thickness Lever to the left.

3.Open the Front Feeder and extend the Paper Output Support.

4.Hold down the RESUME/CANCEL button until the POWER lamp flashes green twice, and then release it immediately.

The nozzle check pattern is printed. Do not open the Top Cover while printing.

1 Make sure that the printer is on, load a sheet of A4 or Letter-sized plain paper in the Auto Sheet Feeder.

Set the Paper Thickness Lever to the left.

2 Open the Front Feeder and extend the Paper Output Support.

3 Open the printer properties dialog box.

See Opening the Printer Properties Dialog Box Directly from the Start Menu.

4 Print the Nozzle Check Pattern.

(1)Click the Maintenance tab.

(2)Click Nozzle Check.

(3)Read the message and click Print Check Pattern.

82