Care and Cleaning
Always turn the power off and remove the plug from the power outlet and the probe from the probe inlet, after use and before cleaning. Allow the BBQ oven to cool before cleaning.
Control probe
If cleaning is necessary, wipe over with a damp cloth.
Note: Before inserting the control probe into the probe inlet, ensure the interior of the inlet is completely dry. To do this wipe interior of probe inlet with a dry cloth or shake out excess water vigorously.
Important: Do not immerse the control probe in water or any other liquid.
Do not knock or drop the probe as this can damage the probe. If damage is suspected, return the control probe to your nearest Sunbeam Service Centre for inspection. Refer to the separate warranty and service centre booklet.
Hotplate and drip tray
The element in the hotplate is cast in, so it is safe to fully immerse in water. Wash the hotplate and drip tray in warm soapy water using a mild household detergent and a soft washing sponge.
A bottle brush may be used to clean the drainage holes in the ribbed hotplate.
The hotplate and drip tray are also dishwasher safe.
Note: Do not use abrasives or metal scourers as they will scratch the
Moulded base and lid
The base and lid can be wiped over with a damp cloth or washed in warm soapy water using a mild household detergent and a soft washing sponge. Do not use abrasives or metal scourers as they may scratch these parts.
Note: Do not place the moulded base or lid in a dishwasher.
Stand
The stand can be wiped over with a damp cloth.
Note: Do not place any part of the stand in a dishwasher.
Storage
Always dry and assemble the Kettle King before storing. Ensure the drip tray and hotplate are correctly positioned.
For outdoor storage of your Kettle King, remove the control probe and store in a safe, dry place.
10
