Using your Kettle King®
Before first use
Remove any stickers from the hotplate. Wash the hotplate and drip tray in warm soapy water using a mild household detergent. Dry hotplate and drip tray thoroughly.
To assemble the stand
1.Place the base of the stand on a flat level surface. With the slots to the bottom, insert the metal tube into the hole in the centre of the base and push down firmly. See figure 1.
3.Place the top shelf onto the metal tube with the utensil rack facing away from you and align it with the swivel shelf. See figure 3. Push down firmly in the centre of the top shelf to secure it.
Figure 1
2.Place the swivel shelf over the metal tube with the handle on your left. Slide the shelf down the metal tube until it rests on the two plastic pins. See figure 2.
Figure 2
Note: Never attempt to remove the plastic pins from the metal tube, as these are the locators for the swivel shelf.
Figure 3
4.Place the base of the Kettle King on the top shelf and fit it into position. The base is correctly positioned when it is flush with the top shelf of the stand on all sides. See figure 4.
Figure 4
6
