English
Appendix A - Optional Devices 99
2. Connect the other end of the USB cable (3) to an
available USB port (4) on the side of the iMac, or
on a USB hub (5).
a To connect the USB cable directly to the
iMac, open the port door (6) on the side of
the iMac, and with the three-pronged USB
icon facing up, plug the cable into the USB
port.
b To connect the USB cable to a USB hub,
plug the cable into the hub as shown below.
The USB hub itself can be connected to a
free USB port on the side of the iMac or on
the iMac keyboard.
Caution:
Do not plug the USB cable directly into the iMac
keyboard. The USB port on the keyboard does not supply
its own power, so the combined current drain of the printer
and the keyboard might exceed USB specifications.
3. Turn on the printer (and the USB hub, if con-
nected), and then turn on the iMac computer.
4. Open the ‘English’ folder, and then double-click
on the Install OKI DP-5000 icon.
5. Follow the instructions on-screen to complete the
installation.
Using the OKI USB printer
Make sure that the USB interface cable is properly con-
nected and your printer is turned on.
1. Select Chooser from the menu and click the DP-
5000 Series icon.
2. Go to Select a USB printer and select printer
required.
Note:
When more than one OKI printer is connected to the
USB port, each printer will be assigned a separate
USB port number (USB #1, USB #2, and so on).
3. If you installed the Queue Kit software, you can
use Background Printing. Select the On button
to enable Background Printing.
4. Close the Chooser. Click OK to confirm you have
changed your current printer.
5. Now you are ready for printing. Refer to your
User's Guide on the OKI Installation Disc for the
printer driver settings.