English
Connecting SCSI interface for Macintosh
When your printer has been positioned in a suitable lo- cation, you can connect it to your Macintosh computer with a SCSI interface and to a suitable AC power source with the power cable.
Connecting the Macintosh SCSI interface module
When using your printer with a Macintosh computer, the printer must be connected to the computer via a SCSI interface module. To install the SCSI interface module on your printer, follow these steps:
1.Before connecting the SCSI interface module turn off the computer and printer, and disconnect the printer power cord.
Note:
The SCSI interface module cannot be connected or dis- connected until the printer power cord has been removed.
2.Remove the rectangular plastic connector cover
(1) located to the right of the printer port on the back of the printer. To remove the cover locate the
black tab on the bottom of the cover, pull it up, and twist it until it breaks free.
1
3.Angle the SCSI interface module (1) so that the tab on top of the module slips under the top edge of the computer printer cable slot. The top edge of the module should rest against the frame of the printer.
1
4.Gently press the bottom of the module until it clicks into place.
Appendix A - Optional Devices | 107 |
