7www.kodak.com/go/support
Setting up for wireless operation
NOTE: The screen identifies your security as either
WEP
or
WPA
.
A
WEP
security key can be either:
5 or 13 characters (0-9, A-Z, some special characters, case sensitive)
10 or 26 characters (0-9, A-F, not case sensitive).
A
WPA
key is 8-63 characters, case sensitive.
The person who set up your network can provide you with this information.
IMPORTANT:
Do not select Scan now (to verify connections, page 10) until you have
installed the software.
3If you haven’t done so already, install the KODAK EASYSHARE Digital Display
Software on your WINDOWS OS computer (see page8 ) so you can set up and
customize your frame right from your computer wirelessly. For MAC OS users, see
page 12.
Connecting to your wireless network later
If you chose not to connect to your network when you first turned on your frame, you
can do it at any time. Here’s how.
1Tap Ho me → Settings .
2Slide to highlight Network, then tap Select.
3Highlight Scan for wireless networks, then tap OK.
4Follow the screen prompts and continue with step 1 on page 5.