Kodak Digital Photo Frame manual Verifying computer/device connections, Menu. See

Setting up for wireless operation

Verifying computer/device connections

After installing the software (page 8), return to your frame, then:

1Tap OK.

The network connection setup screen appears.

2Tap Scan now to verify your computer connection.

NOTE: Select Scan later if you want to finish your wireless setup at a later time. Your frame cannot access your wireless network until you have verified. To do so later, tap Home → Settings → Network

→Verify computer connection.

The Scanning screen appears as the frame scans your network and then lists available computers and other picture sources that your frame can access wirelessly.

Connected computers and devices

3If your computer is listed, your wireless connection is successful. Tap Done to close the window.

If your computer is not listed, tap Scan again or tap Help for options.

You have completed the frame setup. Your frame can now access the content on your

host computer, wirelessly. Your computer appears as a picture source icon on your frame’s Home screen (see page 28). Touch (Home) to start viewing your pictures.

NOTE: If you have more than one frame on your wireless network, give them unique names using the on-screen keyboard so you can tell them apart. Go to Home → Settings → Device configuration

menu. See page 57.

www.kodak.com/go/support 10