ADT Security Services 400 Selecting AMG Tones and Messages , the tone and message selections available when SW2 rocker switch2 (Tone/Message Switch) is Off.

Selecting AMG Tones and Messages 5. Voice Alarm Systems
Unimode 400 Operations PN 50709:A 10/20/97 29
AMG-1 and AMG-E Tone/Message Selections (AMG-1 SW2=Off) Table 23 lists
the tone and message selections available when SW2 rocker switch2 (Tone/Message
Switch) is Off.
Table 23 Setting AMG Tones and Messages (AMG-1 SW2=Off)
1. MPS-400 Notification Appliance Circuit 1 (NAC1) can be manually selected with
an ADT-ACM16AT to produce a desired tone or can be activated through Control-
by-Event by a non-alarm input.
2. If selecting a VROM or VRAM, and a VROM or VRAM chip is not installed, a
trouble indication appears at the AMG-1 when the message is due to begin and the
AMG-1 generates the 1 kHz default tone.
AMG-1 SW2 Rocker
Switches System Status NAC 1 (B01) Condition Audio Tone or Message
S6 S7 S8
X X X No Alarm Off Standby
Off
Off Off Off Off Off No Alarm Alarm On X1000 Hz 0.5 sec on, 0.5 sec off Slow whoop
Off
Off Off Off On On No Alarm Alarm On XHorn 120 ppm (March Time)
Off
Off On On Off Off No Alarm Alarm On XHorn Yelp
Off
Off On On On On No Alarm Alarm On XYelp Wail
On
On Off Off Off Off No Alarm Alarm On X3 slow whoops, VRAM-B plays 3 slow whoops, VRAM-A plays
On
On Off Off O On No Alarm Alarm On XVROM-B message plays VROM-A message plays
On
On On On Off Off No Alarm Alarm On X20 ppm (Two-Stage) VROM-A and VROM-B play
On
On On On On On No Alarm Alarm On XHorn NFPA Uniform Code 3
Temporal pattern fast whoop
X = Indicates that switch or control point can be On or Off.