ADT Security Services 400 - page 37

ATG-2 Audio Tone Generator 5. Voice Alarm Systems

Unimode 400 Operations PN 50709:A 10/20/97 33

Figure 34 shows the functions of the ATG-2 DIP switch pins:

Figure 34 ATG-2 DIP Switch S1

Selecting a Primary

(Evac) Channel Tone Switch S1 rocker switches 1–4 are used to select one of the following tones: slow

whoop, Hi/Lo, or steady tone. Select a tone by setting rocker switches as shown in

Table 27:

Table 27 Evacuation Tone Settings

Selecting a Secondary

(Alert) Channel Tone The ATG-2 can produce a chime or a 20 pulses-per-minute tone on the secondary

(Alert) channel. To select tones for the secondary channel, set S1 rocker switches 7 and

8 in one of the combinations shown in Table 28:

Table 28 Secondary (Alert) Tone Settings

Select Operating Mode You can set the ATG-2 for one of two modes of operation: 1) remote paging only; or 2)

tone generation and paging capability. Set S1 rocker switches 5 and 6 as shown in Table

29. After setting rocker switches, test the ATG-2 for proper operation.

Table 29 Operation Mode Settings

Select to use the ATG-2 in a remote paging application.

Select to use the ATG-2 as the main paging/tone generator.

Select Primary (EVAC) channel tones.

Select Secondary (ALERT) channel tones.

DIP Switch Whoop Hi/Lo Steady

1Off On On

2On Off Off

3On On Off

4Off On Off

DIP Switch Chime 20 PPM

1Off On

2On Off

DIP Switch Remote Paging Only Paging and Tone Generate

5On Off

6Off On

Contents

Main Installation Precautions - Adherence to the following will aid in problem-free installation with long-term reliability: Fire Alarm System Limitations FCC Warning Table of Contents 1. Introduction 2. Using the Control Panel 3. Operating Modes 4. Read Status 5. Voice Alarm Systems 1. Introduction Operating Features Components Page 2. Using the Control Panel Table 1 lists the controls and indicators and where to find information on their use: Table 2 Descriptions of System Status Indicator LEDs Table 1 Control and Indicators System Status Indicator LEDs Control Keys 3. Operating Modes Normal Operation Trouble Operation Fire Alarm Supervisory Signal Non-Alarm Point Operation Trouble Monitor Point Operation Notification Appliance Circuit (NAC) Operation Control-By-Event Operation Releasing Functions Page 3. Operating Modes Intelligent Detector Functions Intelligent Detector Functions Table 7 contains descriptions for intelligent detector functions used with the control panel. Table 7 Intelligent Detector Functions Pre-Alarm Operation (AWACS) Pre-Alarm Operation (AWACS) Table 8 Control Time Functions Time Functions Overview The control panel includes a real-time clock that provides time-of-day, date, and day- Page ! Page 4. Read Status Page Read Status Options Table 13 contains descriptions of the fields shown in Figure 12: Table 13 Default Read Status Values for a Detector Read Status for a Zone Address Page Page Page Read Status Options System Parameters To read System Parameters, follow these steps. Table 15 System Parameters Table 15 contains descriptions of the items shown on System Parameter Screen (Figure 22): Page 5. Voice Alarm Systems Operating Features In this Section Before you Begin AMG-1/AMG-EAudio Message Generator 5. Voice Alarm Systems AMG-1/AMG-EAudio Message Generator Operating the AMG-1 Figure 27 shows the AMG-1 operating controls: Table 21 contains instructions for operating the AMG-1. Table 21 AMG-1 Operating Instructions Selecting AMG Group Functions Selecting AMG Tones and Messages Selecting AMG Tones and Messages Unimode 400 Operations PN 50709:A 10/20/97 29 AMG-1 and AMG-E Tone/Message Selections (AMG-1 SW2=Off) Table 23 lists the tone and message selections available when SW2 rocker switch2 (Tone/Message Switch) is Off. S6 S7 S8 5. Voice Alarm Systems Selecting AMG Tones and Messages 30 Unimode 400 Operations PN 50709:A 10/20/97 AMG-1 and AMG-E Tone/Message Selections (AMG-1 SW2=On) Table 24 lists Status NAC 1 (B01) the tone and message selections available when SW2 rocker switch 2 (Tone/Message Switch) is On. ATG-2 Audio Tone Generator Page Page Fire Fighter's Telephones (FFT-7/FFT-7S) Audio Amplifiers AA-30 Audio Amplifiers AA-100/AA-120 Audio Amplifiers Adjusting the Audio Gain Level (AA-30, AA-100/AA-120) ! Selecting the AA-100/AA-120 Backup Tone AMG Voice Message Options