ADTRAN 1200350L1 user manual Filter Defines /IPX Filter Defines

Chapter 4: Configuration Overview

Dst Port	IP destination port number used for comparison
	Range: 0 to 65535. (decimal format)
Dst Port	Type of comparison that is performed:
Cmpr	= -- ports equal to
	not = --port not equal to
	> --port greater than
	< --port less than
	None --the destination port is not compared
Proto	Protocol used for comparison.
	Range: 0 to 255. (decimal format)
Proto Cmpr	Type of comparison that is performed:
	= --protocols equal to
	not = -- protocols not equal to
	> --protocols greater than
	< --protocols less than
	None -- the protocol is not compared
TCP Est	Yes - only when TCP established
	No - only when TCP not established
	Ignore - ignore TCP flags

Filter Defines /IPX Filter Defines

Write security: 2; Read security: 3

The IPX filter defines apply to any IPX packet whether it is routed or bridged. Also, any IPX encapsulation type will be accounted for. Up to 32 IPX defines can be specified.

Name	Identifies the filter entry (15 characters, max)
Src Net	32-bit source network address
Src Mask	Bits in the source network address which are com-
	pared. (hexadecimal format)
Dest Net	32-bit destination network address
Dest	Bits in the destination network address which are
Mask	compared. (hexadecimal format)

4-24 Router Option Module User Manual 61200350L1-1