ADTRAN 1200350L1 IP Map/RIP Direction, DLCI Mapping/IPX Map, IPX Map/Active, IPX Map/IARP

Chapter 4: Configuration Overview

IP Map/RIP Direction

Write security: 3, Read security: 5

This parameter allows the direction at which RIP advertisements are sent and listened to be specified.

Tx and Rx	RIP advertisements are periodically transmitted
(def)	and are listened to on this virtual circuit.
Tx Only	RIP advertisements are periodically transmitted
	but are not listened to on this virtual circuit.
Rx Only	RIP is not transmitted on this virtual circuit but
	they are listened to.

DLCI Mapping/IPX Map

This menu represents the IPX protocol mapping that is to take place for this DLCI.

IPX Map/Active

Write security: 3, Read security: 5

When set to Yes (def), the Router Option Module will attempt to transport IPX packets for this DLCI.

When set to No, no IP traffic or route will be exchanged.

IPX Map/IARP

Write security: 3, Read security: 5

When set to Yes (def), the Router Option Module will send Inverse ARP packets in order to determine the IPX network on the other end of the virtual circuit. If the IARP is responded to, a route is placed in the IPX route table.

When set to No, the IPX network is to be assigned to the link stati- cally using the IPX Map/Link Network parameter.

IPX Map/Link Network Write security: 3, Read security: 5

This is the IPX network of the link or of the other devices LAN. When this DLCI becomes active, the Router Option Module will add a route to this network in the IPX routing table. This address is also used by the Router Option Module to respond to Inverse ARP re- quests. If this IPX address is left as 0, the link is treated as unnum- bered and the Router Option Module responds to the Inverse ARP with its Ethernet IP address.

61200350L1-1 Router Option Module User Manual 4-31