ADTRAN 1200350L1 RIP/Triggered, PPP Profile/IPX, IPX/Mode, IPX/Remote Network, IPX/Triggered

Chapter 4: Configuration Overview

RIP/Triggered

Write security: 3; Read security: 5

When set to Yes, only IP RIP updates are sent when the routing table has changed and learned routes are not “aged.”

When set to No (def), updates are sent periodically.

PPP Profile/IPX

The IPX menu contains the parameters for exchanging IPX data with the PPP peer.

IPX/Mode

Write security: 3; Read security: 5

When set to On (def), the connection profile to negotiate PPP IPXCP with the PPP peer for exchanging of IPX packets.

IPX/Remote Network

Write security: 3; Read security: 5

A nonzero value in this remote network number will allow the Router Option Module to add a route to the PPP peer’s network to the routing table.

The Router Option Module normally will treat the WAN network as an unnumbered link. This is usually referred to as being a “half- router.” However, a PPP peer which wants to assign a network ad- dress to the WAN link can do so, in which case the Router Option Module will go into “full-router” mode.

IPX/Triggered

Write security: 3; Read security: 5

When set to Yes, only IPX RIP and SAP updates are sent when the routing or service table has changed and learned routes are not “aged.”

When set to No (def), updates are sent periodically based on the RIP and SAP timers set in Configuration/IPX/RIP Timer and Configu- ration/IPX/SAP Timer.

IPX/Type 20 Packets

Write security: 3; Read security: 5

For certain protocol implementations, like NetBIOS, to function in the NetWare environment, routes must allow a broadcast packet to be propagated throughout the IPX networks.

61200350L1-1 Router Option Module User Manual 4-39