1.Define a “Description:” for the label, we chose WAN SIP Interface.
2.Enable the interface by clicking to the right of “Enable:”, making sure that the box is checked.
3.Set the “Interface Mode:” to “IP routing”.
4.In the “IP Settings” area, be sure to configure the interface as appropriate, setting the “Address Type:”, “IP Address:”, “Subnet Mask:”, and “Dynamic DNS:”.
5.Click on the “Apply” radio button.
System Summary
Connect all of the appropriate cables (a T1 crossover cable between the ShoreGear T1 and the Total Access T1 interface and the appropriate Ethernet cables), then click on the “System Summary” link:
960 Stewart Drive Sunnyvale, CA 94085 USA Phone +1.408.331.3300 +1.877.80SHORE Fax +1.408.331.3333 www.ShoreTel.com
- 18 -
