Total Access 600R User Interface Guide (UIG)
PUBLIC
ADDRESS MODE
PUBLIC
ADDRESS
PROTOCOL
MODE
PROTOCOL
PROTOCOL TYPE
PUBLIC PORT MODE
PUBLIC PORT
PUBLIC PORT TYPE
This option is only available when NAT PORT TRANS- LATION is enabled. The public IP address used for this translation entry can be the NAPT IP address assigned to the link or can be specified. You specify an address to direct packets with certain protocols to different servers. Choices are NAPT ADDR and SPECIFIED. Default is NAPT ADDR.
This option is only available when NAT PORT TRANS-
LATION is enabled and the PUBLIC ADDRESS MODE is set
to SPECIFIED. Default is 0.0.0.0.
This option is only available when NAT PORT TRANS- LATION is enabled. The upper layer protocol that is to be monitored for translation. For TCP and UDP, a port number must also be specified. Choices are TCP;
UDP; ICMP; ANY (TCP, UDP, OR ICMP); ALL; SPECIFIED; and NONE. Default is NONE.
This option is only available when NAT PORT TRANS- LATION is enabled and PROTOCOL MODE is set to SPECI- FIED. Default is 0 (decimal).
This option is only available when NAT PORT TRANS- LATION is enabled and PROTOCOL MODE is set to SPECI- FIED. This is a
This option is only available when NAT PORT TRANS- LATION is enabled and PROTOCOL MODE is set to either TCP or UDP.
The public destination port associated with this entry can be specified to add more control over certain types of traffic. Choices are SPECIFIED and ANY PORT. The default, ANY PORT, covers all port types.
This option is only available when NAT PORT TRANS- LATION is enabled and PUBLIC PORT MODE is set to SPECIFIED. However, it will not be available if PROTO- COL MODE is set to ICMP; ANY (TCP, UDP, OR ICMP); ALL; SPECIFIED; or NONE. Default is 0 (dec- imal).
This option is only available when NAT PORT TRANS- LATION is enabled and PUBLIC PORT MODE is set to SPECIFIED. However, it will not be available if PROTO- COL MODE is set to ICMP; ANY (TCP, UDP, OR ICMP); ALL; SPECIFIED; or NONE. This is a read- only field.
Page 42 | © 2002, ADTRAN, Inc. |