Total Access 600R User Interface Guide (UIG)
ROUTER>STATUS>SESSION
This menu contains the current status of all sessions and spanning tree ports.
ROUTER>STATUS>SESSION>PPP SESSION
This menu reflects the results of PPP negotiations, user name, time connected, and data rates for the ses- sion.
LCP | Link Control Protocol. Reflects LCP layer active |
BCP | Shows UP if PPP Bridge Control Protocol has negotiated successfully |
IPCP | Shows UP if PPP IP Control Protocol has negotiated successfully |
UP TIME | Displays how long the PPP session has been connected |
TX PKTS | Number of packets transmitted |
RX PKTS | Number of packets received |
TX BYTES | Number of bytes transmitted |
RX BYTES | Number of bytes received |
ROUTER>STATUS>SESSION>FRAME RELAY
Port
Shows Frame Relay statistics for the WAN port.
PORT INDEX
SIGNAL STATE
TX FRAMES
RX FRAMES
TX BYTES
RX BYTES
SIGNAL TX FRAMES
SIGNAL RX FRAMES
DROP UNKNOWN DLCI
DROP INVALID DLCI
Integer used for identifying DLCIs on an interface. A single DLCI will always be port index 0. Subsequent DLCIs will have incrementing port index values.
Displays “up” when the Total Access 600R is communicating with the Frame Relay switch; otherwise displays “down”
Total packets transmitted out Total packets received from port Total bytes transmitted out port Total bytes received from port
Number of Frame Relay signaling packets transmitted out port Number of Frame Relay signaling packets received from port
Number of frames received that were not associated with any known PVC
Number of frames received that had illegal DLCIs
© 2002, ADTRAN, Inc. | Page 55 |
