Total Access 600R User Interface Guide (UIG)

SYSTEM CONFIG>SNMP MENU>FDL>FAR END IP ADDRESS

This is the far-end IP address used for FDL management. The FDL is a separate IP network from the customer data that is configured under the ROUTER menus. The factory default is 0.0.0.0.

SYSTEM CONFIG>SNMP MENU>FDL>IP NETMASK

This is the subnet mask defining the IP network used for FDL management. The factory default is

0.0.0.0.

SYSTEM CONFIG>SNMP MENU>FDL>LEARN ADDRESS

When set to ON, the destination address on each received packet is assumed to be the FDL interface address. A 255.255.255.252 netmask is used, which determines the far-side address as well (since there can be only two addresses on a subnet with that netmask). When set to OFF, the user must input the IP address assigned to the FDL interface. Default is ON.

SYSTEM CONFIG>SNMP MENU>FDL>ACCEPT ALL SNMP

When set to ON, SNMP gets/sets received over the FDL link are always accepted regardless of the com- munity table. When set to OFF, the community table is searched for valid manager IP addresses and the SNMP traffic is rejected if a match is not found. Default is ON.

SYSTEM CONFIG>MAINT PORT MENU

SYSTEM CONFIG>MAINT PORT MENU>PASSWORD PROTECT

The Total Access 600R’s VT 100 CRAFT port can be accessed through a RJ-48 connector located on the rear of the unit. The setup for this port is under this menu.

When PASSWORD PROTECT is set to NO, the maintenance port is not password protected. When YES (def), the 600R will prompt for a password upon startup.

SYSTEM CONFIG>MAINT PORT MENU>PASSWORD

This is the text string that is used for comparison when password protecting the maintenance port. By default, no pass- word is entered. You can enter up to 15 characters in this field.

The security level for the maintenance port is always set to 0. This gives full access to all menus.

Passwords are case-sensitive.

Page 26

© 2002, ADTRAN, Inc.

64200600L1#T-31A

Page 26
Image 26
ADTRAN 600R manual System Configsnmp Menufdlfar END IP Address, System Configsnmp Menufdlip Netmask

600R specifications

The ADTRAN 600R is a sophisticated router designed to meet the demands of modern telecommunications and networking environments. This device is specifically engineered to support high-speed connectivity and efficient data transmission, making it a preferred choice for service providers and enterprises alike. It integrates advanced features and technologies that enhance performance, scalability, and flexibility.

One of the standout features of the ADTRAN 600R is its robust support for various WAN technologies. It offers versatile connectivity options, including Ethernet, T1, and DS3 interfaces, allowing seamless integration with existing network infrastructures. This adaptability is crucial for organizations looking to upgrade their systems without undergoing a complete overhaul.

In terms of performance, the ADTRAN 600R is equipped with a powerful processor, enabling it to handle high traffic loads efficiently. With support for multiple Gigabit Ethernet and a high-capacity backplane, the router ensures minimal latency and maximizes throughput, making it ideal for bandwidth-intensive applications such as video conferencing, cloud services, and real-time data processing.

The ADTRAN 600R also prioritizes security and reliability. It incorporates advanced security features such as built-in firewalls and virtual private network (VPN) capabilities. These features provide strong protection against cyber threats while facilitating secure remote access for users. The router's high availability and redundancy options, including load balancing and failover capabilities, ensure continuous operation even in the event of hardware failure.

Management and configuration of the ADTRAN 600R are simplified with a user-friendly interface and support for SNMP and CLI management. This ease of use allows network administrators to monitor performance, troubleshoot issues, and implement changes swiftly, enhancing overall network efficiency. Additionally, the router supports Quality of Service (QoS) protocols, ensuring that critical applications receive the appropriate bandwidth and priority.

In conclusion, the ADTRAN 600R is a feature-rich router that combines cutting-edge technology, high performance, and comprehensive security features. Its flexibility in supporting various WAN technologies and management tools makes it an excellent choice for businesses seeking to enhance their networking capabilities. With its ability to deliver reliable and efficient connectivity, the ADTRAN 600R stands out as a strategic asset for any organization aiming to thrive in a data-driven world.