Advantech ADAM-4550 user manual A Test Sample

3.1 A Test Sample

1.Follow procedures in section C to install one ADAM-4550 unit as the MASTER module for a controlling PC and two ADAM-4550s as SLAVEs for the remote devices (see Fig. 3).

2.Start the ADAM Configuration and Diagnos- tic Program on the controlling PC. Select Generate-Trafficmenu and choose Send One Packet. In the window area type in {AADDD...... (cr)} where { is the delimiter selected when configuring the ADAM-4550 units, AA is the hexadecimal unit ID address and DDD...... is the data. The transmitted data DDD...... should be displayed on the PC monitor connected to the remote ADAM-4550.

16 ADAM-4550 User's Manual