4.6. Read Delimiter Character
Description Requests to read the delimiter character data from the module at address AA.
Syntax $AAD(cr)
Response !AA(delimiter character)(cr) if the command is valid
?AA(cr) if an invalid command is entered
Example Command: $0AD(cr)
Response: !0A[(cr)
4.7. Set Data Gate
Description Requests the module at address
AAto set data gate to open(1) or close (0).
Syntax &AAAD1D2(cr)
where AA is the module address
D1 = 1 Open data gate
D1 = 0 Close data gate
D2 = 1 Write to Flash memory
D2 = 0 Do not write to Flash memory
Response !AA(cr) if the command is valid
?AA(cr) if an invalid command is entered
Example Command: &0AA00(cr)
24 |
