Advantech ADAM-4550 user manual Remain at Open Gate/Write to Flash

Response:	!0A(cr)	Note: 1. If the command asks the module to
The command asks the module		write to FLASH memory, the status will
		remain at Open Gate/Write to FLASH
at address 0Ah to close the data
		when the power is turned off and then
gate and not to write to FLASH
		on again.
memory.
Command: &0AA11(cr)		2. If the command asks the addressable
		module to open the data gate, the mod-
Response: !0A(cr)		ule will automatically assume non-ad-
The command requests the		dressable mode. This enables the mod-
		ule to issue commands without adding
module at address 0Ah to open		{AA until the user issues another com-
the data gate and write to Flash		mand to close the data gate.}
memory.

ADAM-4550 User's Manual 25