Advantech FPM-3150G Appendix B Setting Serial Data for Expansion

FPM-3150 Series User Manual 18
Appendix B Setting Serial Data for
Expansion
B.1 Setting Serial Data for Expansion
The twelve kinds of timings below are already programmed in this mod-
ule. The input synchronous signals are automatically recognized.
Resolution Vertical Frequencies
56 Hz 60 Hz 70 Hz 72 Hz 75 Hz
Pass Fail Pass Fail Pass Fail Pass Fail Pass Fail
640 x 480 VVV
800 x 600VVVVV
1024 x 768 VVVV
Note 1: Even if the preset timing is entered, a little
adjustment of the functions such as Horizontal
period, CLK-delay and display position, are
required. The adjusted values are memorized in
every preset number.
Note 2: This module recognizes the synchronous signals
with near preset timing of the frequency of the
HS and Vsync, even in the case that the signals
other than the preset timing that were entered.
Note 3: Because adjustments may not fit, such as
differing magnifying ratios or, in the case that you
use it except for the display timing that was pre-
set.