Advantech PCA-6187 Power-Supply Type, Acpi function, Power Management, Video Off Method

3.7.1 Power-Supply Type

Choose the power-supply type, the choices are "AT" and "ATX".

3.7.2 ACPI function

The choice: "Enabled", "Disabled".

3.7.3 Power Management

This category allows you to select the type (or degree) of power saving and is directly related to the following modes:

1.HDD Power Down

2.Suspend Mode

There are three selections for Power Management, and they have fixed mode settings.

Min Saving	Minimum power management., Suspend Mode = 1 hr.,
	and HDD Power Down = 15 min.
Max Saving	Maximum power management., Suspend Mode = 1 min.,
	and HDD Power Down = 1 min.
User Defined	Allows you to set each mode individually. When not dis-
(Default)	abled, each of the ranges are from 1 min. to 1 hr. except
	for HDD Power Down which ranges from 1 min. to 15 min.
	and disable.

3.7.4 Video Off Method

To select the method to off the video. The Choice : "Blank Screen", "V/H SYNC+ Blank", "DPMS".

3.7.5 Video Off In Suspend

When system is in suspend, video will turn off. The choices are "No" and "Yes".

3.7.6 Suspend Type

The Choice : "Stop Grant", "PwrOn Suspend".

3.7.7 Modem Use IRQ

This determines the IRQ in which the MODEM can use.The choices: "3", "4", "5", "7", "9", "10", "11", "NA".

3.7.8 Soft-Off by PWR-BTTN

If you choose “Instant-Off”, then pushing the ATX soft power switch but- ton once will switch the system to “system off” power mode. You can choose “Delay 4 sec.” If you do, then pushing the button for more than 4 seconds will turn off the system, whereas pushing the button momentarily (for less than 4 seconds) will switch the system to “suspend” mode.

PCA-6187 User’s Manual 40