Advantech PCA-6187 Starting SCSISelect, If you have difficulty viewing the display, press

BIOS Support for Int 13

Enabled, Disabled

Enabled

Extensions2

1 Setting is valid only if Multiple LUN Support is enabled.

2 Settings are valid only if host adapter BIOS is enabled.

7.6 Starting SCSISelect

Follow these steps to start SCSISelect:

1.Turn on or restart your system. During the startup process, pay careful attention to the messages that appear on your screen.

2.When the following message appears on your screen, press the Ctrl-A keys simultaneously (this message appears for only a few seconds): Press <Ctrl><A> for SCSISelect (TM) Utility!

3.From the menu that appears, use the arrow keys to move the cursor to the option you want to select, then press ENTER.

Note:	If you have difficulty viewing the display, press
	F5 to toggle between color and monochrome
	modes. (This feature may not work on some
	monitors.)

Exiting SCSISelect

Follow these steps to exit SCSISelect:

1.Press ESC until a message prompts you to exit (if you changed any settings, you are prompted to save the changes before you exit.)

At the prompt, select YES to exit, then press any key to reboot the com- puter. Any changes you made in SCSISelect take effect after the com- puter boots.

Using SCSISelect Settings

To select an option, use the arrow keys to move the cursor to the option, then press ENTER. In some cases, selecting an option displays another menu. You can return to the previous menu at any time by pressing ESC. To restore the original SCSISelect default values, press F6 from the main SCSISelect screen

69 Chapter7