Chapter 3 Hardware and Peripheral Installation

3.1 Overview of Hardware Installation and Upgrading

The panel PC consists of a PC-based computer that is housed in a rugge- dized aluminum enclosure. Any maintenance or hardware upgrades can be completed after removing both panels..

Warning! Do not remove the ruggedized aluminum covers until you have verified that no power is flowing within the panel PC. Power must be switched off

and the power cord must be unplugged. Every time you service the panel PC, you should be aware of this.

3.2 Installing the 2.5" Hard Disk Drive (HDD)

You can attach one enhanced Integrated Device Electronics (IDE) hard disk drive to the panel PC's internal controller which uses a PCI local-bus interface. The advanced IDE controller supports faster data transfer and allows the IDE hard drive to exceed 528 MB. The following are instruc- tions for installation:

1.Detach the HDD bracket by unscrewing the four screws (#2) on the top of the HDD bracket.

2

Screw

11930030400-M3x4L

21933030500-M3x5L

PPC-V106 User Manual

16

Page 28
Image 28
Advantech PPC-V106 user manual Overview of Hardware Installation and Upgrading, Installing the 2.5 Hard Disk Drive HDD