3.6Removing a Storage Card
1.Open the right centre door.
2.Press the card in and release. The card pops out.
3.Remove the card from the slot.
4.Close and lock the door.
3.7GPRS SIM Card Set Up
1.Remove the two hand screws on the top of the
2.Insert the SIM Card into the SIM Card slot as shown.
3.Push the card into the slot. The card is secure when it is flush with the slot.
Note! The battery must be removed before SIM card can be fitted.
3.8Connecting Devices to the PWS-8033M
This section describes how to connect devices to the
3.8.1Connecting USB
The
Connecting a USB Type A
The illustration below shows how to connect a USB type A device to the PWS- 8033M. The connector can only go in one way. If it does not go in smoothly, check the orientation and try again.
18 |