Advantech UNO 2173A/AF - page 12

UNO-2173A/AF User Manual 4

I/O Interface

• Serial Ports 2 x RS-232

• Serial Port Speed 50 ~ 115.2 kbps

• LAN 1 x 10/100/1000 Base-T RJ-45 ports

(Built-in boot ROM in flash BIOS)

• USB Ports 2 x USB 2.0

Environment

• Humidity 95% @ 40° C (non-condensing)

• Operating TemperatureIEC 68 2-2 with 100% CPU/ I/O loading

-20 ~ 70° C (-4 ~ 158° F)

With no airflow: Up to 60° C

• Ingress Protection IP40

• Shock Protection IEC 68 2-27CF: 50 G @ wallmount, 11 ms

HDD: 20 G @ wall mount, half sine, 11 ms

• Vibration Protection IEC 68 2-64 (Random 1 Oct./min, 1hr/axis.)

CompactFlash: 5 Grms @ 5 ~ 500 Hz,

HDD: 1 Grms @ 5 ~ 500 Hz

Rear I/O (UNO-2173AF Only)

• Display LVDS with backlight control

• USB Ports 2 x USB 2.0 ports

• Audio 5.1 channel HD audio

• LAN 1 x 10/100/1000 Base-T RJ-45 ports

• Serial Ports 1 x RS-422/485 serial port

• Serial Port Speed 50 ~ 115.2 kbps

Reserved Functions

• Battery Backup SRAM* 1MB

• Printer Port* 1 x printer port pin head

*Note: This function is reserved for projects

Contents

Main Page Page Page Page Page Contents Chapter 1 Overview ...........................................................2 Chapter 2 Hardware Functionality ................................10 Chapter 3 Initial Setup.....................................................18 Appendix A System Settings and Pin Assignments ..........24 Overview Chapter 1 Overview 1.1 Introduction 1.2 Hardware Specifications Page 1.3 Safety Precautions Page Page 1.5 Accessories Hardware Functionality Chapter 2 Hardware Functionality 2.1 Introduction 2.2 RS-232 Interface (COM1~COM2) 2.3 RS-422/485 Interface (UNO-2173AF) 2.3.1 RS-422/485 Selection 2.3.2 Automatic Data Flow Control Function for RS-485 2.3.3 Termination Resistor (SW3) 2.4 LAN: Ethernet Connector 2.5 Power Connector 2.6 PS/2 Keyboard and Mouse Connector 2.7 USB Connector 2.8 VGA Display Connector 2.9 Battery Backup SRAM (Reserved) 2.9.1 Lithium Battery Specification 2.10 Power Button / Power Management 2.11 Reset Button 2.12 HD Audio ( UNO-2173AF) 2.13 PCI Express Mini Card Socket 2.14 LVDS (UNO-2173AF) Page Initial Setup Chapter 3 Initial Setup 3.1 Inserting a CompactFlash Card 3.2 Chassis Grounding Page 3.5 Installing a Wireless LAN Card and Antenna Page Page Page Appendix A System Settings and Pin Assignments A.1 System I/O Address and Interrupt Assignment Table A.1: UNO-2173A/AF System I/O Ports Table A.2: UNO-2173A/AF Interrupt Assignment A.2 Board Connectors and Jumpers A.3 RS-232 Standard Serial Port (COM1~COM2) Table A.4: RS-232 standard serial port pin assignments A.4 RS-422/485 Serial Port (UNO-2173AF) A.5 Power Connector (PWR) Table A.5: RS-422/485 serial port pin assignments Table A.6: Power connector pin assignments Page A.8 VGA Display Connector Table A.9: VGA adaptor cable pin assignment A.9 LVDS and LVDS_PWR (UNO-2173AF) A.9.1 LVDS Table A.10: LVDS pin definitions A.9.2 LVDS Power Setting (CN17) A.9.3 LVDS_PWR (Backlight Control) Table A.11: CN17 Configuration Table A.12: LVDS_PWR pin definition A.10 Clear CMOS (CN3)