17
4. SySTEm diagRam
The typical connection diagram for the entire PV system is shown in the following figure.
1.Pv-Panel: Provide DC power to Protect PV inverter
2.Protect Pv PV-inverter Converts DC (Direct Current) power from PV panel(s) to AC (Alternating Current) power. Because Protect PV is grid-connected it controls the current amplitude according to the PV Panel power supply. Protect PV always tries to convert the maximum power from your PV panel(s).
3.Connection system: This “interface” between Utility and PV-Inverter- may consist of electrical breaker, fuse and connecting terminals. To comply with local safety standards and codes, the connection system should be designed and implemented by a qualified technician.
4.utility: Referred to as “grid” in this manual, is the way your electric power company provides power to your place. Please note that Protect PV can only connect to low-voltage systems (namely, 220, 230VAC, 50/60Hz).
