User information
Switching on the appliance/Selecting a programme
Select the programme using the programme knob, e.g., LINEN 
/EASY CARES 
.
By selecting a programme, you switch the appliance on at the same time.
– The display lights up and shows the programme set, the current time and the estimated end of the cycle.
–Depending on the programme, the washing machine suggests a temperature and a spin speed. You can change these suggestions.
–The lighting for the display switches itself off at the end of the cycle or, if the appliance is not started after the programme is set, after 10 minutes. To switch the light on again, press any key or turn the programme knob.
Changing the temperature
Press the TEMP. key
repeatedly until the desired
LINEN/EASY | CARES | 12.45 | |
Cycle end | at | 14.37 | |
50°C | 1000 |
|
|
|
|
| |
temperature is displayed.
Changing spin speed / Selecting rinse hold
Press the RPM key 
repeatedly, until the desired spin
speed or 
RINSE HOLD is displayed.
•With spin speed «0» the last rinse water is drained off at the end of the cycle, but the washing is not spun.
| LINEN/EASY | CARES | 12.45 | |
| Cycle end | at | 14.37 | |
| 50°C | 1000 |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
•With 
RINSE HOLD the washing is left to soak in the last rinse water. There is no final spin after the intermediate spin(s). Intermediate spins are
12
