User information
Starting a programme
1.Check that the water tap is open.
2.Press the START/PAUSE key .
The programme is started or it starts after the time delay set has elapsed.
If after pressing the START/PAUSE key the display shows
“Door not closed”, the door has not been shut properly. Push the door
firmly closed and press the START/PAUSE key | again. |
Programme progress
The display indicates the stage of the programme that is currently being performed as well as the time of the end of the programme.
During the washing cycle the time of the end of the programme may change as the programme adjusts itself to different conditions (e. g., type and quantity of laundry, out of balance spin detection, special rinses, etc.).
LINEN/EASY CARES | 12.45 |
Wash14.37
800
50°C
Interrupting a programme / Adding washing
Interrupting a programme
•The wash programme can be interrupted at any time by pressing
the START/PAUSE key . It is then
•To stop the washing machine before the programme has ended, turn the programme knob to OFF.
Important : Be careful if there is water in the appliance !
17