User information
Operating problems
Many checks have been carried out during the manufacture of your washing machine. However, if you face a problem with its operation, please have a look at the following table before calling the After Sales Service. Moreover, it is possible that one of the following messages appears on the display :
Problem with water supply : No incoming water. Check tape & hose»
Problem with water draining : | No drain. Check drain hose / filter» |
Cover open : | Door not closed. Please check» |
Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all checks, the problem persists, contact the After Sales Service.
Symptom | Cause | |
|
|
|
|
|
|
The washing machine will | • | the washing machine is not correctly |
not start or will not fill : |
| connected, the electrical installation is |
|
| not working, |
| • | the cover of your washing machine |
|
| and the drum flaps are not correctly |
|
| closed (Door not closed. Please check) |
| • you did not control the program start | |
|
| correctly, |
| • there is a power failure, | |
| • | the water supply is closed off (No |
|
| incoming water. Check tape & hose) |
| • | the water tap is closed (No incoming |
|
| water. Check tape & hose) |
| • | the water inlet is blocked (No inco- |
|
| ming water. Check tape & hose) |
The washing machine fills | • | the drain siphon is attached too low |
up but empties again |
| (see installation section). |
immediately : |
|
|
|
|
|
32
