User information
Water inlet
The
against the damages caused by the water. Indeed, the water inlet worns away by time and it can so deteriorate. In this case, the «aqua- stop» prevents the water from going into the appliance.
The problem is indicated by the appearance of
a red mark in the window «A». Close the water inlet tap and call the After Sales Service.
Screw the supply pipe connector onto the water inlet tap (20x27 mm).
Open the water inlet tap.
You cannot prolong the water inlet pipe. If it is too short, call the After Sales Service.
Drain
The drain siphon must be placed inside a drain
pipe (or in a washbasin) at a height of between
70 and 100 cm. Make sure that it cannot fall.
•Important: the drain pipe must never be pro-
longed. If it is too short, call a professional.
Eletrical connection
You can only connect this washing machine to 230 V single phase power supply.
Check rating of the fuse line : 10 A at 230 V.
The washing machine must not be connected through an extension cable or a power bar.
Check that the earthing connection is conform with the regulations in force.
41
