AEG 70630 manual Starting the washing program, Is pressed, If the delay timer has been set

Operating Instructions

Starting the washing program

0 1. Check that the water tap is open.

2.Start the washing program:

Press the START/PAUSE button

The washing program is started or starts at the end of the time delay set.

3	The door is not correctly closed if, when the button START/PAUSE
	is pressed,

– the error code Cd is shown in the multi-display and

– the indicators PRE WASH, RINSE and RINSE+ flash

In this case, press the door firmly closed and again press the START/PAUSE button.

If the delay timer has been set:

The start time delay set on the time delay counts down; the time remaining until the program starts is displayed in the multi-display (in hours remaining, e.g. 5h). During this time you can add washing and change or stop the delay timer.

• Load the washing: Press the START/PAUSE button. The door can be opened. Then close the door and press the START/PAUSE button again.

• Changing or stopping delay timer: Press the DELAY TIMER button re- peatedly until the desired time is displayed. When the program dura- tion is displayed (display in minutes e. g.125) the washing program starts without delay.

23