Operating Instructions
Consumption Values and Time Requirements
The values for selected programs in the following tables were deter- mined under normal conditions. However, there is a helpful orientation aid for domestic operation.
Program Selector/ | Filling Quantity | Water | Energy | Time |
Temperature | in kg | in Litres | in kWh | in Minutes |
COTTONS/LINEN 95 | 5 | 45 | 1.70 | 137 |
COTTONS/ LINEN 601) | 5 | 42 | 0.94 | 125 |
COTTONS/LINEN 40 | 5 | 49 | 0.60 | 122 |
2.5 | 54 | 0.50 | 102 | |
DELICATES 30 | 2.5 | 50 | 0.30 | 68 |
|
|
|
|
|
WOOL/ P (Handwash) 30 | 2 | 48 | 0.20 | 37 |
|
|
|
|
|
1)Note: Program setting for a test in accordance with EN 60 456. The consumption values can deviate from the stated values depending on the water pressure, hardness, inlet temperature, room temperature, type and quantity of washing, the washing powder/liquid used, fluctuations in the mains voltage and selected additional functions.
Running time display
3 | The durations of the washing programs depend |
| on the washing habits and ambient conditions |
at the installation location. E. g. the washing type, washing quantity, type of detergent, wa- ter temperature and room temperature etc.
can influence the duration of the washing program.
The washing machine saves from each program the running times of the last wash cycles and calculates from them the average running time for a washing cycle. This average running time is shown by the Multi- display during the next wash.
After several washes, the running time shown in the multi display is thereby adapted to the usual washing practice and the ambient condi- tions at the installation location.
13
