Operating Instructions
33
Water runs out under
the washing machine.
The screw connection on the
intake hose is leaky.
Tighten the intake hose
screw connection.
The drainage hose is leaky. Check the drainage hose and
replace it if necessary.
The drain pump cover is not
correctly closed. Close cover correctly.
Washing in caught in the
filling door.
Abort program, remove
washing from the filling
door. Restart the program.
The emergency drainage
hose is not correctly closed
or leaks.
Close the emergency drain-
age hose correctly (see the
section "Carry out emer-
gency drainage"). Call Cus-
tomer Service if the
emergency drainage hose
leaks.
Conditioner was not
washed in, compart-
ment æ for care
agents is filled with
water.
The conditioner insert in the
compartment for care agents
is not correctly attached or
is blocked.
Clean the detergent drawer,
attach the conditioner insert
securely.
Washing heavily
creased.
Too mush washing probably
put in.
Pay attention to the maxi-
mum filling quantity (see
Program tables). In the case
of easy-care textiles, select
the program EASY IRON.
Washing is not well
spun. Residual water is
still visible in the drum.
Error code (2 is shown
in the multi-display.
Drainage hose bent. Remove the bend.
Maximum pumping height
(discharge height 1m from
the unit's standing surface) is
exceeded.
Contact your customer serv-
ice. For pumping heights
over lm he can offer you a
conversion kit as a special
accessory.
Drain pump is blocked.
Switch off the unit and pull
out the mains plug. Clean
the drain pump.
If a siphon is connected: Si-
phon blocked. Clean the siphon.
Problem Possible Cau se Remedy