What to do if, Remedying faults | AEG 70630 instruction

Operating Instructions

What to do if...

Remedying faults

In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you use the Customer Service for one of the faults listed here or to remedy an operating error, the Customer Service technician's visit will not be free of charge, even during the warranty period.

• If the error code C1, C2 or Cd is shown in the multi-display, you may be able to re- medy the problem yourself (see the faults

table below).

After remedying the fault, press the button START/PAUSE. If the error code is shown again, inform Customer Service.

•In the case of all other displayed faults (C and number or letter code), please inform Customer Service, quoting the error code.

	Problem	Possible Cause	Remedy
		The mains plug is not	Plug in the mains plug.
		plugged in.	Plug in the mains plug.
		plugged in.
		The fuse of the building's	Replace the fuse.
		wiring is not in order.	Replace the fuse.
	The washing machine	wiring is not in order.
	The washing machine	The filling door is not cor-	Close the filling door; The
	does not work.	The filling door is not cor-	Close the filling door; The
		rectly closed.	lock must engage audibly.
		Button START/PAUSE not	Press the button START/
		Button START/PAUSE not	PAUSE until the program
		pressed for long enough.	PAUSE until the program
		pressed for long enough.	starts.
			starts.
	The filling door cannot		Cancel the child safety fea-
	The filling door cannot	The child safety feature is set	ture (see Section "Child
	be closed.	The child safety feature is set	ture (see Section "Child
	be closed.		Safety Feature“).
			Safety Feature“).

	Error code Cd is shown
	in the multi-display.	The filling door is not	Close the filling door cor-
	The indicators	The filling door is not	Close the filling door cor-
	The indicators	correctly closed.	rectly. Restart the program.
	PRE WASH, RINSE and	correctly closed.	rectly. Restart the program.
	PRE WASH, RINSE and
	RINSE+ flash.

31

Image 31

AEG 70630 manual What to do if, Remedying faults, Problem Possible Cause Remedy

Contents

ÖKO-LAVAMAT 70630 update Dear Customer Contents Installation and connection instructions Warranty conditions / Customer service centres Before Using for the First Time SafetyCorrect Use General Safety Child Safety Disposing of your old appliance DisposalEnvironmental tips Disposing of the Packaging Material Front view Unit descriptionDrawer for detergent and care agent Program Selector Control panel WOOL/P Handwash Additional program buttons Running time display Water Energy Time TemperatureProgram Selector Before the First Wash What does Update mean? Sort washing and prepare Prepare washing cycle Washing Types and Care Codes Water softener How much washing detergent and care agent?Water hardness details Brief Instructions Run a Washing CycleAfter the Washing Program Ends Tables Setting the Washing Program Soaking duration Set the delay timer/soaking durationDelay timer Change Spin Speed / Select Rinse Hold For the maximum filling quantities, see the Program tables Indicator Door Indicator START/PAUSEOpening and Closing the Filling Door Add the washing Add Washing Detergent/Care Agent If using liquid detergent / tabletsSection Washing Detergents and Care Agents Starting the washing program If the delay timer has been setIs pressed Change the Spin Speed Completion of the Washing ProgramProgram sequence display Multi-display If the display Over Dosing lights up, too much Washing cycle is finished/Remove the washing Type of Washing Max Care Codes TemperatureProgram Tables Washing Type of Washing Separate Conditioning/Starching/ImpregnatingSeparate Rinse Separate Spin Detergent Drawer Cleaning and Care Main door Washing Drum Before cleaning the drain pump Cleaning the drain pumpGency emptying Problem Possible Cause Remedy Remedying faultsWhat to do if Water tap closed Open the water tap Water is not running Replace it if necessary Tor lights up green If there are white remnants on the washing If the washing results are not satisfactoryIf there are still grey spots on the washing If at the end of the last rinse foam is still visible Carrying out emergency drainage When the water is completely drained Additional rinsing cycle RINSE+ Cancel additional rinseSet additional rinse On the inside of the filling door Child Safety FeatureCancelling the child safety feature Can be started Installation Safety Precautions Installation and connection instructions Under units Installation of the applianceTransporting the appliance Remove transportation protection Inside of the unit against splash water Close the hole with the cap G Installation on a concrete base Prepare the installation placeInstallation on vibrating floors Compensate for floor unevenness Pensated for by adjusting the adjustable feetDed foot as far as it will go Water connection Electrical connectionPermissible water pressure Water inflow Water drain Tie the bend to the tap or the wall using a piece of stringWater drain-off inside a basin Delivery heads over 1m Technical dataDimensions Dimensions in mm Otros puntos de Postventa en el extranjero Further after-sales service agencies overseasAutres agences étrangères assurant le service après-vente Weitere Kundendienststellen im Ausland Estonia Latavia Poland Croatia New ZealandBulgaria Kuwait/Arabian Gulf Cyprus Lebanon Oman Hungary Israel Malaysia Saudi ArabiaJapan Singapore Slovenia Thailand Slovakia Rep South AfricaPage Page Index When do you incur costs even during the warranty period? Service AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG