Operating Instructions

Problem

Possible Cause

Remedy

 

Water tap closed.

Open the water tap.

Water is not running.

 

Close the water tap. Unscrew

Filter in screw connection of

the hose from the tap, re-

Error code (1 is shown

the intake hose blocked.

move the sieve and clean un-

in the multi-display.

 

der running water

 

Water tap is blocked with

Check water tap and have it

 

limescale or is faulty.

repaired if necessary.

 

The transport packaging has

Remove transport packaging

 

according to the installation

 

not been removed.

 

and connection instructions.

 

 

 

The height-adjustable screw

Adjust the feet in accordance

 

with the installation and

 

feet are not correctly set.

 

connection instructions.

 

 

The washing machine

There is not much washing in

This does not impair the

vibrates during opera-

the drum (e.g. only one

tion or it is on an une-

function.

dressing gown).

ven surface.

 

 

 

 

 

Check the laying of the

 

The water could not be com-

drainage hose and eliminate

 

pletely pumped off before

the bend if necessary, or

 

spinning because

clean the drain pump and, if

 

The drainage hose is bent or

required, remove foreign

 

The drain pump is blocked.

bodies from the pump hous-

 

 

ing.

The washing solution

Too much detergent was

Meter the detergent exactly

of the main wash

in accordance with the man-

probably used.

froths up a lot.

ufacturer's information.

 

 

 

 

32

Page 32
Image 32
AEG 70630 manual Water tap closed Open the water tap Water is not running