Instructions for use

Start the Washing Program

01. Check that the water valve is open.

2. Start the washing program: Press the button

START/PAUSE (START/PAUZE, MARCHE/PAUSE). The washing program is started.

3The filling door is not correctly closed if the indicators DOOR (DEUR, PORTE) and MAIN WASH (HOOFDWAS, LAVAGE) flash red when the button START/PAUSE (START/PAUZE, MARCHE/PAUSE) is pressed. In this case, press the filling door firmly closed and press the button START/ PAUSE (START/PAUZE, MARCHE/PAUSE) again.

Completion of the Washing Program

Program Sequence Display

Before the start, the program steps to be carried out are displayed by the program sequence display. The current program step is displayed during the washing program.

Changing a Washing Program

Changing or aborting a program

01. Press button START/PAUSE (START/PAUZE, MARCHE/ PAUSE).

2.Turn programme knob to OFF (UIT, ARRET). The washing program is aborted.

3.If required, set a new washing program. Otherwise turn the programme knob to PUMP OUT (POMPEN, VIDANGE) and then press the button

START/PAUSE (START/PAUZE, MARCHE/PAUSE).

3The washing program can be interrupted at any time with the button START/PAUSE (START/PAUZE, MARCHE/PAUSE) and continued by press- ing the button again. Changing the washing program is possible only after the programme knob was turned to OFF (UIT, ARRET).

22

Page 22
Image 22
AEG 72330 manual Start the Washing Program, Completion of the Washing Program, Changing a Washing Program